Back to Uncategorized
web7

Flex Fitness Center Driven Leg Extension – RARE

Flex Fitness center driven leg extension. This is a RARE machine made by THE all-time best commercial gym equipment manufacturer. This leg extension (like all Flex units) feels amazing and is built like a tank. This unit is center driven. This is important because with traditional leg extensions the resistance is not even. It’s either heavier on the left or right side (depending on which side the stack is on and the arm of the machine extends). The angle is great, and the range of motion is perfect. This machine is in beautiful condition and perfect working order.

**OUT OF STOCK**

Category: Tags: , ,

Related products

Precor Discovery Seated Leg Curl – Current & Latest Model
Precor Discovery Seated Leg Curl – Current & Latest Model
Precor Discover seated leg curl. This is the current and latest model available by Precor. This machine is in beautiful condition and retails for more than $5,000. Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. Adjustable Seat: Yes, gas-assisted ratcheting seat adjustment Adjustments: Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps.  Adjustment points are highlighted with a contrasting color for ease-of-use. Instructional Placard: Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.  QR codes provide quick and easy video instruction from your smart phone or Preva app. Bearings and Pivot Points: Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning.  Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings.  Bolts are grade 5 or above in all applications. Water Bottle and Accessories Holder: The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean. Pulleys and Cables: Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. Frame and Finish: The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat. Bolt Down Capability: Yes General Features: Knee pad moves with user's lower legs; no thigh hold-down pad required. Start position and roller pads adjust for optimal exercise mechanics. Incremental Add-on Weight 5 lbs. (2.3 kg) Weight Stack 240 lbs. / 109 kg Workout Area (L x W) 66 L x 50 W inches / 168 L x 127 W cm Equipment Dimensions and Weight Length 61 inches / 155 cm Width 49 inches / 125 cm Equipment Weight 594 lbs. / 269 kg Height 59 inches / 150 cm Shipping Dimensions and Weight Shipping Weight 645 lbs. / 293 kg **OUT OF STOCK**
Life Fitness Signature Series 13 Piece Circuit Full Gym Package
Life Fitness Signature Series 13 Piece Circuit Full Gym Package
Life Fitness Signature Series 13 unit circuit in excellent condition. This is the perfect package for any gym or studio looking for the latest, top notch commercial equipment at a fraction of retail. This circuit is in beautiful condition! These are current models by Life Fitness and retail at $4,500 EACH!! There is a machine here for each and every muscle group. These units have been cleaned, serviced and are ready to go.  Any pads that needed to be done have been newly reupholstered.  Why spend 3x more on new, with a 12–17-week lead time, when you can buy the same thing NOW in similar condition. Circuit consists of all Life Fitness Signature Series units:
Signature:
  1. Lateral Raise
  2. Lat Pulldown
  3. Biceps Curl
  4. Row Rear Delt
  5. Hip Adductor
  6. Hip Abductor
  7. Chest Press
  8. Shoulder Press
  9. Back Extension
  10. ISO Lateral Lat Pulldown
  11. Leg Press
  12. Pec Fly
  13. Abdominal
**OUT OF STOCK**
Precor Icarian 601 45 Degree Plate Loaded Linear Leg Press Extra Loading Horn
Precor Icarian 601 45 Degree Plate Loaded Linear Leg Press Extra Loading Horn
Precor Icarian 601 45 degree plate loaded linear leg press with extra loading horn. This unit is in great condition. This is a classic, original, highly favored and sought after leg press. Built like a tank with the perfect angle, and silky smooth linear bearings, are a few reasons why this is considered one of the best leg presses of all time. This unit also has a large foot plate for various foot positions. This leg press also has a smaller footprint than most.      
$3,850.00
Life Fitness Signature Series Platinum Squat Rack
Life Fitness Signature Series Platinum Squat Rack
Very clean, current model Life Fitness Signature Series squat rack, priced well below retail. Unit is in great shape. The Signature Series Olympic squat rack has five racking positions and eight weight horns.  A molded urethane protective racking system protects the bar from wear and helps reduce noise. Signature Series premium benches and racks seamlessly integrate with other pieces of the line to complete a family of high-quality strength training products. Contoured cushions utilize a molded foam for superior comfort and durability Pads have plastic backers to protect and increase durability Frame Description 11-gauge steel frame ensures maximum structural integrity; standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; urethane paint guards to protect paint Hand Grips Grips retained with aluminum collars, preventing them from slipping during use; hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant TECHNICAL SPECIFICATIONS Weight: 400 lbs. Dimensions: 66" L x 77.5" W x 75.5" H      
$1,089.00